Pets Animal Blood Pressure Monitor Vet Manual Sphygmomanometer Portable Ultrasound Veterinary Blood Pressure Monitor

Overview

Basic Info.

Model NO.	MCV0232
Probe	9 MHz
Battery	DC 7.4VT2600mAh
Product Name	Vet Blood Pressure Monitor
Transport Package	Standard Package for Export
Specification	standard size
Trademark	Mecan
Origin	Guangzhou
Production Capacity	1000pieces/Month

Product Description

Pets Animal Blood Pressure Monitor Vet Manual Sphygmomanometer Portable Ultrasound Veterinary Blood Pressure Monitor

Product Description

FeaturesDescription of the host display interface1. Strength of blood flowing 2. Capacity of battery (1) 6 grid: dump energy 90% (2) 5 grid: dump energy 70% (3) 4 grid: dump energy 50% (4) 4 grid: dump energy 30% (5) 4 grid: dump energy 20% (6) 4 grid: dump energy 10%

Operation of the Doppler host

One end of high sensitive probe contact with the pet the other end which is a connector need to connect with the main machine 1. Connecting the sensor to the main machine then open the power switch. The two points(point 1 and point 2) should be corresponded to insure it's connecting. And pull out the probe by pinching where there are lines. The main machine is ready for test now 2. Put some ultrasonic couplant on the top of the sensor and also the skin of the test area of the animal 3. Put the sensor on the testing area and move the sensor slowly until find the strongest pulse 4. When connect with the earphone, the loudspeaker will be closed automatically in order to help us listen the Doppler sound more clearly 5. If the power light does not work, please charge the battery of the main machine Note: Please do not test the blood pressure when charging

Operation of the Doppler blood pressure meter

1. Inflation : Close the valve and then slowly press the gasbag 2. deflation: According to the direction of the following photo , open the valve gently press the gasbag until all of the gas in the cuff has been deflated. 3. the connection and loosen of the cuffs: connect the cuffs loose the cuffs as the following pictures show

Notes

Probe: Please turn off the power immediately after usage. The probe should be protected carefully. Do not crash and collide the probe(the probe is very expensive ) with other things. Avoiding to damage the chip in the probe . Couplant: It is not allowed to use ECG viscose, baby oil and other oils except couplant. Because those oil will corrode and damage the probe. Battery: When power light become dark and speaker stop work, it is necessary to change the battery Specification

Probe	9 MHz
Battery	DC 7.4V 2600mAh lithium battery
Speaker	4Ω 1W
Earphone	dual rack 270Ω 3.5mm Plug
Host	160mm(L) *90mm(W)*40mm(H)
Package	37mm(L)*31mm(W)*14mm(H)

Detailed Photos

Company Profile